HBPH-C1 is a display designed for connection with the HBPH sensor. In the display, it is possible to calibrate and set up the alarm limit. The display is provided in a version for installation into the front of a panel, as well as a version built into the cabinet. The cabinet version has a 110/240 V supply and can be installed either indoors or outdoors.
Display with programmable settings from the front of the display | |
Displaying pH level - 0...100 % as well as alarm indication for high level | |
24 V AC/DC power supply | |
Available in cabinet for 110/240 V AC supply |
SPECIFICATIONS
Power supply | |
---|---|
Power supply | 24 DC + 10% |
Current consumption | Max 600 mA |
Electronic connections | Screw terminals |
Wiring size | 2,5 mm2 |
Input | |
Analouge input - sensor | 4-20 mA |
Analouge input - feedback | 4-20 mA |
Relay function | Alarm - max level |
Relay voltage | 5-25 VDC |
Output | |
Analouge output | 4-20 mA |
Load | 3A/24VDC |
Relay ouput | @24VAC / DC: 3A @110 VAC. 5A @240 VAC: 5A |
Environmental conditions | |
Ambient temperature | -20...+70 °C |
Protection degree - front mounted | IP45 |
Humidity | 20...80 % |
Mechanical specifications | |
Installation | Front of panel |
Measure | 96x96x115 mm |
Cutting dimension in panel | 92,8x92,8 mm |
Materiale | Plastic |
Approvals | |
EMC | EN61000 |
Display | |
Display | Red LED, 3 digits |
Alarm | Green and red LED |
Programming | From front |
Update frequency | 1 time/sec |
House design | Ordering code |
---|---|
Display for pH sensor - 24 V DC power supply | HBPH-C1 |
Display for pH sensor built-in a cabinet and with a 110/240 V power supply installed | HBPH-C1-ENC |
Visitors Counter : 140119